Liberon Spirit Wood Dye is a fast drying ethanol wood stain which absorbs deep into the timber, available in eight different shades that can be mixed together with other colours of the same range to obtain intermediate shades. Liberon Spirit Wood Dye is recommended for use on hardwood and softwood furniture and interior architectural wood items, it’s fast drying and won’t raise the grain. The dye is Ideal for colouring Mahogany, Oak and other similar timbers. Spirit dyes are easy to apply especially on previously finished woods providing any previous finish or wax polish has been removed. Old wax deposits can be removed with Liberon Wax Polish remover used in conjunction with Liberon 0000 Steel Wool, then any residue removed with a clean cloth. Shake the can well before use - if multiple tins are needed mix them together to achieve a consistent colour (batches can vary slightly in shade). Apply one coat liberally with a foam applicator or fine bristle brush working in the direction of the grain where possible, allow the stain to absorb and wipe away any excess with a clean cotton cloth following the direction of the the grain. If a deeper colour is required a second coat can be applied after 4 hours although the second coat must be applied quickly with care taken not to go back over the surface as this can pull the first coat. Once dry, this dye must be finished finished with a water-based varnish, oil or wax polish. Coverage 8-16m² / litre