Moisture-curing one-component polyurethane foam specially developed for use with assembly guns

Field of Application:
Suitable for filling joints on windows and roller shutter boxes and insulating cavities.

Advice:
The substrates must be stable, clean and free of dust, grease and release agent. Dampen dry substrates with water (spray). The ideal application temperature is +20°C. Observe the operating instructions of your gun. Shake the can well at least 30 times before screwing onto the assembly gun and after work interruptions. Do not tilt or overtighten when screwing onto the gun. Remove any fresh splashes of foam immediately using PU universal cleaner. Cured foam can only be removed mechanically.
Not suitable for PE, PP, silicone, PTFE
Not UV-resistant
Please observe the safety instructions on the can and the information on the safety data sheet.

"From 24 August 2023, adequate training must be completed prior to industrial or commercial use".

Advantages:
Greatly increased yield
Accelerated curing
Very high adhesive strength
Good thermal and acoustic insulation
Noise protection tested by ift

Contents:
500 ml